Visit Another P2Rx Topic Hub | ||||||||||||||||||||||||
|
Auto Body - Reasons for Change LinksThese resources give more detailed information about the concepts presented in this section. There are 14 links in this section.
Sorted by Resource Type Sort Alphabetically by Title Instead NOTE: [PDF] links require the Acrobat Reader from Adobe. Article/report Abstract: A report on a study of spent autobody paint booth arrestor filters. Source: Local Hazardous Waste Management Program in King County URL: http://www.govlink.org/hazwaste/publications/PaintFilterStudyF inal.pdf Isocyanates Profile: Autorefinishing Industry Abstract: Background information on the use of diisocyanates in the automotive refinishing industry is available in this draft report. Also contains EPA's Description of Isocyanate Chemical Category and Hazard Concerns which contains health and safety information and recommended engineering controls and protective equipment to reduce inhalation and dermal exposure. Source: U. S. EPA Design for the Environment URL: http://www.epa.gov/opptintr/dfe/pubs/auto/profile/index.htm Case study/success story Abstract: Profile of 10 shops who implemented P2 changes. Includes, drivers for change, obstacles and benefits. Source: U.S. Environmnetal Protection Agency Design for the Environment URL: http://www.epa.gov/opptintr/dfe/pubs/auto/factors/factors.pdf Fact sheet/checklist Abstract: Overview of federal and state (Minnesota) regulations affecting auto body shops. Permitting requirements may vary by state; check local agency rules. Source: Minnesota Pollution Control Agency URL: http://www.pca.state.mn.us/air/pubs/5-13.pdf Autobody Repair and Refinishing: Hazards and Solutions Abstract: References for workers to aid in recognizing and controlling some of the hazards associated with autobody repair and refinishing. Source: Occupational Safety and Health Administration URL: http://www.osha.gov/SLTC/autobody/recognition.html Environmental Compliance Checklist for Auto Body Repair Shops [PDF] Abstract: Lists hazardous waste, air, and water regulations in Montana. BMP's and general recommendations are helpful anywhere and include: parts and gun washing; common shop wastes like rags, batteries, used oil, etc.; prep and painting processes and wastes; floor sumps and more. Source: Montana Extension Pollution Prevention Program URL: http://www.p2pays.org/ref/06/05082.pdf Motor Vehicle Air Conditioning Abstract: Gives a list of fact sheets explaining the effects of CFC-12 on the ozone layer, the substitutes and how they must be used, and the regulations that govern car motor vehicle conditioning in the US. Source: U. S. Environmental Protection Agency (EPA) URL: http://www.epa.gov/ozone/title6/609/index.html Safe Work Practices that Reduce Worker Exposure to Hazardous Chemicals [PDF] Abstract: Outlines auto body shop tasks, safety risks and associated safe work practices and impacts on worker exposure. Source: U.S. EPA Design for the Environment URL: http://www.epa.gov/opptintr/dfe/pubs/auto/bestpractices/bestpr The Finishing Line for Body Shops [PDF] Abstract: Questions and answers on low VOC coatings for auto body shops including an outline of the federal regulations implemented in 1999. Source: Northeast Waste Management Officials Association URL: http://www.p2pays.org/ref/03/02179.pdf Manual/handbook/curriculum Abstract: Shop-oriented manual that defines and justifies pollution prevention as well as giving best management practices and case studies of successful efforts. Source: University of Nebraska Cooperative Extension URL: http://www.p2pays.org/ref/03/02323.pdf How The New Motor Vehicle Waste Disposal Well Rule Affects Your Business [PDF] Abstract: During normal vehicle repair and maintenance, vehicle fluids may drip, spill or otherwise enter floor drains or sinks in service areas. These fluids can introduce various toxic chemicals into drinking water sources. This guide describes the rule governing Class V injection wells, implemented in 1999 -- how to identify them, how to comply and best management practices. Source: U. S. Environmental Protection Agency (EPA) URL: http://www.epa.gov/safewater/uic/smallcompliance.pdf Web site Abstract: This national Compliance Assistance Center helps those engaged in automotive service, collision repair and other sectors of the automotive industry better understand environmental responsibilities, and achieve compliance with environmental program requirements. Source: Coordinating Committee For Automotive Repair URL: http://www.ccar-greenlink.org/ Paints and Coatings Resource Center Abstract: Provides regulatory compliance information to organic coating facilities, industry vendors and suppliers, and others. Tools include VOC & HAP calculators, a state and federal regulations locator and a members database. Source: Paints and Coatings Resource Center URL: http://www.paintcenter.org/ Safety and Health Topics for Auto Body Repair and Refinishing Abstract: Resources for recognition, control and compliance with safety and health issues for the auto body industry. Source: Occupational Safety and Health Administration URL: http://www.osha.gov/SLTC/autobody/ |
|||||||||||||||||||||||
|